All4Zero has completed its third proof of concept (PoC) with the validation of a technology proposed by Eurecat, whose assessment involved ArcelorMittal, Airbus and Repsol. Pilot-scale trials, carried out using cooling tower blowdown water, achieved a water recovery rate of 90.8% and reduced salt concentration by approximately 90%.

Cooling towers play an essential role in numerous industrial processes. During operation, evaporation progressively increases the concentration of salts in the water, making it necessary to remove and replace part of the flow. Improving the treatment of these streams would enable a greater proportion of the water to be recovered for reuse and reduce the need for fresh water intake.

In response to this challenge, common to multiple industrial sectors, All4Zero launched a technological challenge to identify and validate solutions capable of advancing water circularity and reducing the consumption of new water resources.

The solution developed by Eurecat is based on Low-Salt-Rejection Reverse Osmosis (LSRRO) technology, which uses specifically modified membranes to treat highly saline water streams.

Advancing water circularity in industry

The PoC addressed the different stages required to assess the technology’s viability, from industrial water characterisation and membrane modification to digital process modelling, laboratory testing and pilot-scale validation.

During the pilot trials, conducted using approximately 1,000 litres of water from Repsol’s cooling towers, the system achieved an overall water recovery rate of 90.8%. In addition, analytical results indicated an estimated reduction of around 90% in the equivalent sodium chloride (NaCl) concentration of the treated water.

These results demonstrate the technical feasibility of the solution under the pilot-scale conditions tested and represent a significant step forward in assessing its potential industrial applications.

Sandra Casas, Head of Eurecat’s Water Technologies Line, explains: “This proof of concept has demonstrated that LSRRO technology can be applied to industrial water treatment and achieve recovery rates of more than 90%. These results now allow us to continue optimising the technology and to assess the industrial applications where it can deliver the greatest value.”

This is the third proof of concept successfully completed by All4Zero and reflects one of the hub’s main objectives: validating technologies against common industrial challenges and generating evidence of their potential before progressing to larger-scale deployment.

According to Paula Sanz, Director of All4Zero: “Before considering industrial-scale deployment of a technology, it is essential to test it, measure its performance and understand its limitations. This proof of concept clearly illustrates All4Zero’s role: connecting industrial challenges with innovative technological solutions and accelerating their validation.”

The results will now support further optimisation of the technology, as well as an assessment of the operating conditions and industrial use cases where it could offer the greatest potential to improve water management in industry.

About All4Zero

All4Zero is Spain’s only private, cross-sector, non-profit industrial technology innovation hub. It was founded by ArcelorMittal, Holcim, Iberia and Repsol, together with 23 other leading companies from a range of sectors, which have joined forces in this pioneering initiative with a shared goal: to accelerate the development of disruptive technologies and projects that contribute to decarbonisation and the circular economy.